Hypercure 200D
Microprocessor Controlled State-of-the-Art UV Curing System

Model: H200D offers the same high quality features as the H200 but in a microprocessor controlled and programmable system. The H200D has two modes of operation, manual and automatic. In the automatic mode a pre-prograrnmed exposure cycle can be initiated. Each exposure cycle consists of a user defined interval between exposures (up to 25 cycles can be programmed and stored into memory).

The front panel display is a 2 line x 20 character vacuum fluorescent display which displays information during setup and operation. In operating mode, the top of the display shows the status of the shutter, exposure and the lamp. The bottom of the display shows the lamp life in hours.
User-interface includes
  • Set exposure time
  • Program exposure cycle
  • Run exposure program
  • Set wake-up time
  • Enter sleep mode
  • Lamp monitoring interval
  • Reset monitor hours
  • Reset lamp hours
  • Set hour and date
  • An RS-232C serial port for communicating with a host computer
Designed with a patented external lamp alignment feature for high-precision and maximum UV output!
Back